SIMEX self-levelling PHD 600 swing planer has been designed to mill pre-set sections on hard and compact surfaces.
With the PHD 600 swing planer for excavators you can remove the entire layer of asphalt or cement in preparation for trenching or mill deteriorated sections for later resurfacing. You can work on horizontal, vertical or sloped surfaces and due to the swinging support, pivoted on the same rotation axis as the milling drum, the attachment maintains a perfect planing surface support in any condition, regardless of the ground contour and the attachment's position with respect to the prime mover.
| SPECIFICATIONS | PHD 600 |
|---|---|
| Carrier weight (t) (1) | 16 - 22 |
| Standard Drum | |
| Total width (mm) | 600 |
| Depth (mm) | 0 - 200 |
| Special Drums on request | |
| Width (mm) | 75 - 600 |
| Max Depth (mm) | 250 |
| LH-RH independent depth adjustment | - |
| Min distance from curb (mm) | 75 (40*) |
| Swinging support rotation angle | 105° |
| Operating weight (kg) | 1,150 |
| Req Oil Flow l/min | 120 - 200 |
Product Disclaimer
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.
(*) On request.
Specifications are subject to change without notice.
