The ALLU AC 30-47 is a purpose built screener crusher bucket that enables hard rock and often troublesome demolition materials and construction debris to be effectively reduced onsite and less material sent to landfill.
The AC 30-47 essentially functions as a jaw crusher or a primary crushing tool, allowing the excavator or wheel loader to process and recycle materials onsite.
By crushing and recycling materials onsite, the AC 30-47 minimises the need for transportation of waste and reduces the need for virgin materials.
Quickly change the material output size
The AC 30-47 has a unique feature allowing the discharge size to be changed in 3 to 5 minutes by simply removing the adjusting pin in the back and repositioning it to one of the numbered holes on the frame.
Less jamming and bridging
Another unique feature of the AC 30-47 is its jaw that can be run in both directions, which helps avoid jamming or bridging of the material, even with wet materials.
With the bottom eccentric jaw movement material can flow freely through the jaws increasing the capacity of the material output and reverse mode allows to keep the jaws clean.
Features
- Upper jaw that is safe and easy to replace
- Crushing plates that allow material to flow freely through jaws
- Streamlines wear-resistant frame and no external parts for a long-lasting operational life
- Angled side and tip plates to reduce the wear and provide a higher crushing filling rate
- 16 different fragment sizes
- Pin adjustable for quick fragment size changes
- Protected belt drive – maintenance-free, no adjustment
Applications
- Demolition
- Excavation
- Construction
- Utility and Road Works
- Concrete Waste Recycling
- Asphalt Recycling
- Waste Rock handling at Quarries
- Concrete Pipe Industry
- Crushing & Recycling Bricks, Ceramics etc
| SPECIFICATIONS | AC 30-47 |
|---|---|
| Excavator weight (t) | 26 - 38 |
| Operating Pressure (bar) | 250 |
| Max Operation Flow (lpm) | 200 |
| Loading Capacity (m3) | 1.2 |
| Weight (kg) | 5,540 |
| Crushing Cam Opening (mm) | 440 |
| Output size regulation (mm) | 0-16 to 0-250 |
Check carrier allowed attachment weight from carrier manufacturer. Check application requirements.
- Minimum carrier weight is based on structural volume, material density of 0.9 t/m3 and 300 kg adapter plate included.
- Volume capacities calculated according to ISO standards without extra sides. Extra sides can increase the volume capacity up to 30%.
- Unit weight without adapter. Weights are approximate and vary depending on the tool configuration.
- Minimum required pressure and flow depend on the application.
Specifications are subject to change without notice.
